![]() |
Home | Libraries | People | FAQ | More |
Histograms are a basic tool in statistical analysis. A histogram consists of a number of non-overlapping cells in data space. When an input value is passed to the histogram, the corresponding cell that envelopes the value is found and an associated counter is incremented.
When analyzing a large low-dimensional data set, it is more convenient to work with a histogram of the input values than the original values. Keeping the cell counts in memory for analysis and/or processing the counts requires far fewer resources than keeping the original values in memory and processing them. Information present in the original can also be extracted from the histogram[1]. Some information is lost in this way, but if the cells are small enough[2], the loss is negligible. A histogram is a kind of lossy data-compression. It is also often used as a simple estimator for the probability density function of the input data. More complex density estimators exist, but histograms remain attractive because they are easy to reason about.
This library provides a histogram for multi-dimensional data. In the multi-dimensional case, the input consist of tuples of values which belong together and describing different aspects of the same entity. For example, when you make a digital image with a camera, photons hit a pixel detector. The photon is the entity and it has two coordinates values where it hit the detector. The camera only counts how often a photon hit each cell, so it is a real-life example of making a two-dimensional histogram. A two-dimensional histogram collects more information than two separate one-dimensional histograms, one for each coordinate. For example, if the two-dimensional image looks like a checker board, with high and low densities are alternating along each coordinate, then the one-dimensional histograms along each coordinate would look flat. There would be no hint that there is a complex structure in two dimensions.
The term histogram is usually strictly used for something with cells over discrete or continuous data. This histogram class can also process categorical variables and it even allows for non-consecutive cells if that is desired. There is no restriction to numbers as input either. Any C++ type can be fed into the histogram, if the user provides a specialized axis class that maps values of this type to a cell index. The only remaining restriction is that cells are non-overlapping, since there must be a unique mapping from input value to cell. The library is not able to automatically ensure this for user-provided axis classes, so the responsibly is on the user.
Furthermore, the histogram can handle weighted input. Normally, the cell counter which is connected to an input tuple is incremented by one, but sometimes it is useful to increment by a weight, an integral or floating point number. Finally, the histogram can be configured to store any kind of accumulator in each cell. Arbitrary samples can be passed to this accumulator, which may compute the mean or other interesting quantities from the samples that are sorted into the cell. When the accumulator computes a mean, the result is called a profile. The feature set is informed by popular libraries for scientific computing, notably CERN's ROOT framework and the GNU Scientific Library.
The library consists of three orthogonal components:
Histograms store axis objects and a storage object. A one-dimensional histogram has one axis, a multi-dimensional histogram has several. When you pass an input tuple, say (v1, v2, v3), then the first axis will map v1 onto index i1, the second axis v2 onto i2, and so on, to generate the index tuple (i1, i2, i3). The histogram host class then converts these indices into a linear global index that is used to address bin counter in the storage object.
![]() |
Note |
---|---|
To understand the need for multi-dimensional histograms, think of point coordinates. If all points that you consider lie on a line, you need only one value to describe the point. If all points lie in a plane, you need two values to describe the position. Three values are needed for a point in space. A histogram puts a discrete grid over the line, the plane or the space, and counts how many points lie in each cell of the grid. To approximate a point distribution on a line, a 1d-histogram is sufficient. To do the same in 3d-space, one needs a 3d-histogram. |
This library supports different axis types, so that the user can customize how the mapping is done exactly, see axis types. Users can furthermore chose between several ways of storing axis types in the histogram.
When the number and types of the axes are known at compile-time, the histogram
host class stores axis types in a std::tuple
.
We call this a static histogram. To access a particular
axis, one should use a compile-time number as index (a run-time index also
works with some limitations). A static histogram is extremely fast (see
benchmark), because there is
no overhead and the compiler can inline code, unroll loops, and more. Also,
many user errors are can be caught at compile-time rather than run-time.
Static histograms are the best kind, but cannot be used when histograms are to be created with an axis configuration that is only known at run-time. This is the case, for example, when histograms are created from Python or from a graphical user interface. Therefore also more dynamic kinds of histograms are supported.
There are two levels of dynamism. The histogram can hold instances of a
single axis type in a std::vector
.
Now the number of axis instances per histogram can vary at run-time, but
the axis type must be the same for all instances. We call this a semi-dynamic
histogram.
If also the axis types need to vary at run-time, one can place boost::histogram::axis::variant
type in a std::vector
,
which can hold one of a set of different concrete axis types. We call this
a dynamic histogram. The dynamic histogram is a single
type that can store arbitrary sequences of different axes types, which
may be generated at run-time. The polymorphic behavior of the generic
boost::histogram::axis::variant
type has a run-time cost, however.
Typically, the performance is reduced by a factor of two compared to a
static histogram.
![]() |
Note |
---|---|
The design decision to store axis types in the variant-like type |
An axis defines an injective mapping of (a range of) input values to a bin. The logic is encapsulated in an axis type. Users can create their own axis classes and use them with the library, by implementing the Axis concept. The library comes with four builtin types, which implement different specializations.
boost::histogram::axis::regular
sorts real numbers into bins with equal width. The regular axis also
supports monotonic transforms, which are applied when the input values
are passed to the axis. This can be used to make a fast logarithmic
axis, where the bins have equal width in the logarithm of the variable.
boost::histogram::axis::variable
sorts real numbers into bins with varying width.
boost::histogram::axis::integer
is a specialization of a regular axis for a range of integers with
unit bin width. It is much faster than a regular axis.
boost::histogram::axis::category
is a bijective mapping of unique values onto bin indices and vice versa.
This can be used with discrete categorical data, like "red",
"green", "blue", for example.
Each builtin axis type has a few compile-time options, which change its behavior.
A storage type holds the actual cell values. It uses a one-dimensional
index for cell lookup, computed by the histogram host from the indices
generated by its axes. The storage needs to know nothing about axes. Users
can integrate their own storage classes with the library, by implementing
the storage concept.
Standard containers can be used as storage backends, the library adapts
them with the boost::histogram::storage_adaptor
.
Cell lookup is often happening in a tight loop and is random-access. A
normal std::vector
works well as a storage backend.
Sometimes this is the best solution, but there are some caveats to this
approach. The user has to decide which type should represents the cell
counts and it is not an obvious choice. An integer type needs to be large
enough to avoid counter overflow, but only a fraction of the bits are used
if its capacity is too large. This is a waste of memory then. When memory
is wasted, more cache misses occur and performance is degraded (see the
benchmarks). The performance of modern CPUs depends a lot on effective
utilization of the CPU cache, which is still small. Using floating point
numbers instead of integers is also dangerous. They don't overflow, but
cap the bin count when the bits in the mantissa are used up.
The default storage used in the library is boost::histogram::unlimited_storage
.
It solves these issues with a dynamic counter type management, based on
the following insight. The curse
of dimensionality makes the total number of bins grow very fast
as the dimension of the histogram grows. However, having many bins also
reduces the typical number of counts per bin, since the input values are
spread over many more bins now. This means a small counter is often sufficient
for high-dimensional histograms.
The default storage therefore starts with a minimum amount of memory per cell, it uses an 1 byte. If the count in any cell is about to overflow, all cells switch to the next larger integer type simultaneously. This goes on, the capacity per cell is always doubled when it is used up, until 8 byte per bin are reached. The following images illustrate this progression for a storage of 3 bin counters. A new memory block is always allocated for all counters, when the first one of them hits its capacity limit.
When even that is not enough, the default storage switches to a multiprecision type similar to those in Boost.Multiprecision, whose capacity is limited only by available memory. The following image is not to scale:
This approach is not only memory conserving, but also provides the strong guarantee that bin counters cannot overflow.
![]() |
Note |
---|---|
The no-overflow-guarantee only applies when the histogram is not using weighted fills or if all weights are integral numbers. When floating point weights are used, the default storage switches to a double counter per cell to store the sum of such weights. A double cannot provide the no-overflow-guarantee. |
The best part: this approach is even faster for a histogram with sufficient size despite the run-time overheads of handling the counter type dynamically. The benchmarks show that the gains from better cache usage outweigh the run-time overheads of dynamic dispatching to the right bin counter type and the occasional allocation costs. Doubling the size of the bin counters each time helps, because the allocations happen only O(logN) times for N increments.